Waterborne Interior Wall Paint Special Primer


Features :
Waterborne products——safe and environmental friendly
Strong adhesion and large brushing area
Easy to apply & excellent leveling and anti-splashing performance
Due to its high whiteness, the finishing paint effect can be greatly improved.

Introduction

Elaborately selecting high-quality raw materials and applying brand-new odor removing technology in production, Chenyang waterborne interior wall paint special primer has fresh and natural smell. It also has good adhesion, easy application, high whiteness and other features. Using together with finishing paint products, you can get brighter film. This product is an ideal choice for painting new walls and refurbishing old walls.

Direction

Application Method : roller coating, brushing and spraying. High-pressure airless spraying is preferred.

Dilution :Dilute with clear water. For brushing and roller coating, the maximum adding water amount is 20%. For airless spraying, the maximum adding water amount is 5%~ 10%.The water amount can be changed according to application effect and difficulty. Don`t exceed the maximum amount, or the film performance will be affected. Stir evenly before use.

Base materials treatment : Remove dusts, greases, mold algae and other adhesion matters on the painted surface. Keep the surface clean, dry and smooth. The surface moisture content of walls is less than 10% and the pH value is less than 10. For old walls, shovels and spades should be used to remove old films that are not strong. Dusts, powders and other impurities on the surface also should be removed. The surface should be polished to be smooth and thoroughly dry.

Application environment :Temperature is 5-35℃ and humidity is less than 85%. In summer, drying too fast should be prevented. In winter, baking should be prohibited. For sand and dust weather, windows should be tightly closed.

Recoating time :Take dry 30-micron film under 25 -30 ℃ as reference. Surface drying is for 30 minutes. Hard drying is for 60 minutes. Recoating interval is for 2 hours.

Tool cleaning : After pausing or finishing painting, please use clean all used tools by clean water in time.

Theoretical paint consumption : 9-11 m2 / L/single time(dry film thickness is about 30 microns). Due to difference on actual applying surface roughness and dilution ratio, the paint consumption is different.

Suggestion: It`s recommended to use together with Chenyang interior wall paint products.

 
Security Items
 

Hazard statement : During applying, if eyes, skin or hair are accidentally touched by paints, eye irritation or skin allergy may be caused. 

Precautions: Avoid inhalation of dusts, smokes, gases, smogs, steam and spray. Wear protective equipment while applying paints. Clean hands and other contact areas after operation.

Accident response: If skin or hair is contacted, rinse with plenty of soapy water and clear water. If eyes are contacted, rinse immediately with plenty of clean water and seek for medical help. If skin irritation or rash occurs, please consult a doctor in time.

Safe Storage: Store in well-ventilated places with the temperature of 5℃ to 35℃.Keep containers tightly sealed. Avoid direct sunlight. Store in isolation from strong acids, alkalis, oxidants, food and animal feed.

Waste Disposal: Disposal of paint waste should comply with national and local regulations on disposal (refer to Product Safety Technical Instructions before use). 

 
Environmental Protection
 

The harmful matter content is in line with the stipulation in the National Standard GB 18582 “Indoor Decorating and Refurbishing Materials——Limit of Harmful Substances of Interior Architectural Coatings”. 

Notes:The product performance and the application data listed above are obtained under standard experimental conditions. For the actual application environment is diverse and out of control, please don`t hesitate to contact Hebei Chenyang Industry and Trade Group Co.Ltd